WESM zl Management and Configuration Guide WT.01.28 and greater

9-21
Fast Layer 2 Roaming and Layer 3 Mobility
Verifying and Managing Layer 3 Mobility
Verifying and Managing Layer 3 Mobility
To verify that Layer 3 mobility is functioning correctly, check the following:
■ The local Wireless Edge Services zl Module begins communicating with its
peers.
■ Stations that roam to an RP adopted by a Wireless Edge Services zl Module on
a different VLAN preserve their IP addresses and active sessions.
Monitoring Peers
Select Network Setup > Layer 3 Mobility and click the Peer List tab to view each
peer’s current status. You should see the Established status, as shown in Figure 9-10,
which indicates that the local module and the peer are communicating.
Figure 9-10. Viewing a Peer’s Status