WESM zl Management and Configuration Guide WT.01.28 and greater

9-25
Fast Layer 2 Roaming and Layer 3 Mobility
Verifying and Managing Layer 3 Mobility
To test Layer 3 roaming, move a station from one RP’s cell to the cell of an RP
supported by a different Wireless Edge Services zl Module. Verify that the station’s
IP address remains the same and sessions remain active.
You can also verify a Layer 3 roam from your module’s Web browser interface.
To view information about stations, select Network Setup > Layer 3 Mobility and
click the Station Status tab. You can also view this information by selecting Device
Information > Wireless Stations and clicking the Layer 3 Mobility-Station Status tab.
Figure 9-13. Viewing a Station’s Status
The screen displays the following information for every station associated with any
Wireless Edge Services zl Module in the Layer 3 mobility domain:
■ Station MAC—station MAC address
■ Station IP—station IP address
■ Home Module IP—HM IP address
■ Home Module VLAN—HM VLAN ID