WESM zl Management and Configuration Guide WT.01.28 and greater

10-31
Redundancy Groups
Configuring a Redundancy Group
Figure 10-15.802.11bg Configuration Screen
3. Under Advanced Properties, in the Adoption Preference ID field, enter a
preference ID, and then click the OK button.
4. Click the Save link at the top of the Web browser interface to save the changes
to the startup-config.
To force another module to adopt a particular RP, change its radio preference ID to
match the ID on that second module, as explained in “Configuring Advanced
Properties for a Particular Radio” on page 3-31 in Chapter 3: “Radio Port Configu-
ration.”