WESM zl Management and Configuration Guide WT.01.28 and greater

11-5
RADIUS Server
RADIUS Authentication
Depending on your environment, you might also need to complete these tasks:
■ Specify proxy RADIUS servers to which the local RADIUS server forwards
queries—This step allows the Wireless Edge Services zl Module to relay
authentication requests in certain domains to external servers.
■ Specify RADIUS clients, which query the local RADIUS server—This step
allows the module to authenticate users who connect to different NASs—in both
the wired and wireless network.
Whenever you make a change to the RADIUS settings, the Web browser interface
will ask you to restart the RADIUS server. (See Figure 11-1).
Figure 11-1. Restarting the RADIUS Server
Click the Yes button.
Choosing the Authentication Type for 802.1X/EAP
For 802.1X authentication, you must select the EAP method with which the RADIUS
server authenticates users. Users’ wireless client utilities must be configured for the
same EAP method. Table 11-2 lists the available options, including the requirements
for each. Refer to this table when you add the user’s account