WESM zl Management and Configuration Guide WT.01.28 and greater

11-15
RADIUS Server
RADIUS Authentication
To modify a group, select it and click the Edit button. In the EDIT screen that is
displayed, configure the settings just as you would for a new group. (However, you
cannot change the group’s name nor whether it is a normal or guest group.) When
you are finished, click the OK button.
To delete a group, select it in the Network Setup > Local RADIUS Server > Groups
screen and click the Delete button. The Web browser interface asks you to restart the
RADIUS server for the change to take effect.
Creating User Accounts. You must configure a user account for every user allowed
to connect to your network. This requirement holds true whether the internal
RADIUS server authenticates users with passwords or with digital certificates.
Just as the Wireless Edge Services zl Module’s RADIUS server defines two types of
groups, it defines two types of user accounts:
■ a normal account
■ a guest account
Normal users can only join normal groups, and guest users can only join guest groups.
You configure the following parameters for user accounts:
■ username
■ if you are using TTLS or PEAP, a password
■ if the account is a guest account, an expiration time
To configure an account, complete these steps:
1. Select Network Setup > Local RADIUS Server and click the Users tab.
2. Click the Add button. The ADD screen is displayed.