WESM zl Management and Configuration Guide WT.01.28 and greater

11-30
RADIUS Server
RADIUS Authentication
Figure 11-13.Viewing Domain Proxy Servers
8. Click the Save link at the top of the Web browser interface to save the changes
to the startup-config.
Specifying Global RADIUS Settings
Global RADIUS settings regulate the Wireless Edge Services zl Module’s RADIUS
server’s communications with proxy RADIUS servers.
To configure these settings, follow these steps:
1. Select Network Setup > Local RADIUS Server > Configuration.
2. In the Timeout field, specify how long, in seconds, the module should wait for
a response to a request to a domain proxy server.
The default timeout is 5 seconds, and the valid range is from 5 to 10 seconds.
You might select a longer time for a busy network.