WESM zl Management and Configuration Guide WT.01.28 and greater

11-33
RADIUS Server
RADIUS Authentication
Enabling Authentication to the Internal Server on a WLAN
WLANs that use the following authentication methods require authentication to a
RADIUS server:
■ 802.1X
■ Web-Auth
■ MAC Authentication
In Chapter 4: “Wireless Local Area Networks (WLANs),” you learned how to
configure a WLAN to require authentication to an external RADIUS server.
This section explains how to configure the Wireless Edge Services zl Module’s
internal RADIUS server to take over authentication.
You must enter 127.0.0.1 for the RADIUS server’s IP address. The shared secret field
does not matter.
To configure 802.1X authentication to the internal RADIUS server, complete these
steps:
1. Select Network Setup > WLAN Setup > Configuration.
2. Select the WLAN from the list and click the Edit button. The Edit screen for the
WLAN is displayed.