WESM zl Management and Configuration Guide WT.01.28 and greater

11-41
RADIUS Server
RADIUS Accounting
b. Leave the default port: 1813.
c. You should not specify a key when you use the module’s internal server. If
you have already specified a key, erase the Accounting Shared Secret field.
6. Optionally, configure settings for a secondary server by completing the fields in
the Secondary column of the Accounting section.
7. From the Accounting Mode drop-down menu, choose when the Wireless Edge
Services zl Module forwards a message to its internal server:
• Start-Stop—when a station connects to this WLAN and when it disconnects
• Stop-Only—only when a station disconnects
• Start-Interim-Stop—when a station connects to this WLAN, periodically
for as long as the connection persists, and when the station closes the
connection
8. If you have selected Start-Interim-Stop for the Accounting Mode, enter a value
in the Interval field.
This setting determines how often, in seconds, the module sends periodic reports
on user activities. (It applies only when you select Start-Interim-Stop.) The
default value is 60 seconds, and the valid range is from 60 to 3600 seconds (1
hour).
9. Click the OK button.
10. In the WLAN’s Edit screen, click the OK button.
11. Click the Save link at the top of the Web browser interface to save the changes
to the startup-config.
Viewing the Internal RADIUS Server’s Accounting Logs
When you set up RADIUS accounting to the Wireless Edge Services zl Module’s
internal server, the module stores messages about user activity as accounting logs.
The directory for the logs is flash:/log/radius.
To view the log file in the Web browser interface, select Network Setup > Local
RADIUS Server and click the Accounting Logs tab.