WESM zl Management and Configuration Guide WT.01.28 and greater

12-6
Wireless Network Management
Monitoring the Wireless Network
entered correctly and that the station’s VLAN assignment is correct. The administra-
tor can also troubleshoot the network’s Dynamic Host Configuration Protocol
(DHCP) setup.
You can also save information about one or more wireless stations to a comma-
separated file on your workstation. Select the stations, and then click the Export
button. (Use the Ctrl or Shift keys to select more than one station.)
Disconnecting a Wireless Station
If you access the Device Information > Wireless Stations screen and see a wireless
station that should not connect to your network, you can immediately disassociate
the station. Select the station and click the Disconnect button.
Because the station can immediately reassociate unless you take steps to prevent this,
the prompt shown in Figure 12-2 is displayed.
Figure 12-2. Preventing a Station from Reconnecting to the Wireless Network
If you click the Yes button, the Filter dialog box is displayed. (See Figure 12-3.)
Figure 12-3. Creating a Filter to Block an Unauthorized User’s Access