WESM zl Management and Configuration Guide WT.01.28 and greater

12-10
Wireless Network Management
Monitoring the Wireless Network
■ Roam Count (No de-authentication)—The module tracks the number of times
that the station has de-authenticated, which indicates the number of times that
the station has roamed away from the module (not between RPs on the same
module).
■ IDM Attributes—If you are using ProCurve Identity Driven Manager (IDM), this
section lists IDM settings received for the user accessing the network through
this station. Possible settings include a dynamic VLAN (which is also called the
user-based VLAN), access control lists (ACLs), priority (which is the 802.1p
value assigned to the user’s traffic), and ingress bandwidth (which is displayed
if rate limiting has been configured for the user).
Viewing All Stations in a Layer 3 Mobility Domain
When your Wireless Edge Services zl Module is in a Layer 3 mobility domain, it
tracks all stations associated with any module in the domain. This information
prepares the module for implementing Layer 3 roaming should one of these stations
roam to it. In addition, the module must maintain information about stations that have
roamed away from it, but for which it still acts as home module.
To view information about every station associated with any Wireless Edge Services
zl Module in the Layer 3 mobility domain, follow these steps:
1. Select Device Information > Wireless Stations.
2. Click the Layer 3 Mobility-Station Status tab.