WESM zl Management and Configuration Guide WT.01.28 and greater

12-45
Wireless Network Management
AP Detection
Figure 12-30.Viewing the Radio State
The radio state should now be listed as Detector on the Network Setup > Radio
> Configuration screen, as shown in Figure 12-30.
Note The Wireless Edge Services zl Module stores the configuration for a particular radio
with its MAC address so that this configuration persists even if the radio powers
down.
For more information on radio configurations, see Chapter 3: “Radio Port Configu-
ration.”
3. Configure all radios of a particular type to scan for APs.
a. Select Network Setup > Radio Adoption Defaults > Configuration.