WESM zl Management and Configuration Guide WT.01.28 and greater

12-55
Wireless Network Management
AP Detection
Configuring the Module to Report Unapproved APs
You can configure the Wireless Edge Services zl Module to trigger a Simple Network
Management Protocol (SNMP) trap whenever a radio detects an unapproved AP.
Complete these steps:
1. Select Management > SNMP Trap Configuration > Configuration.
Figure 12-39.Management > SNMP Trap Configuration > Configuration Screen
2. Expand the Wireless heading and then the RP Detection heading.
3. Click the Enable all sub-items button.
4. Make sure that the Allow Traps to be generated box is checked.