WESM zl Management and Configuration Guide WT.01.28 and greater

12-59
Wireless Network Management
Configuring Station Intrusion Detection
Configuring Thresholds for Station Intrusion Detection
To configure station intrusion detection, complete these steps:
1. Select Special Features > Station Intrusion Detection > Configuration.
Figure 12-42.Configuring Station Intrusion Detection
2. In the Detection Window field, enter a value from 5 through 300 seconds. This
setting determines the length of time to which each threshold applies. For
example, if the threshold for Excessive Probes is 60 and the Detection Window
is 10 seconds, the Wireless Module will count how many probes it detects in
each 10-second time period.
3. Set the wireless Station threshold value for each violation type. If exceeded, the
wireless station will be filtered and displayed within the “Filtered wireless
stations” screen. Enter a number from 0 through 65,535. The Wireless Edge
Services zl Module will apply this threshold to each station.
Note: Setting a violation parameter to 0 will disable the option.