WESM zl Management and Configuration Guide WT.01.28 and greater

12-65
Wireless Network Management
Logging and Alarms
Figure 12-45.Configuring Logging
The Logging aggregation time sets the time between the receipt of identical messages
and a new message. Any message is immediately printed, unless it is identical to the
previous one. If it is identical, then a counter is incremented instead. If a different
message arrives, then the accumulated count is printed (%MGMT-4-
V12AUTHERROR: Last message repeated x times), followed by the new message.
If no new message arrives within the Logging aggregation time of the last duplicate,
then the accumulated count is printed and the count is cleared.
You can configure Logging aggregation time up to 60 seconds. (If the value is 0, then
all events are logged immediately.)
Forwarding Logs to an External Server
You can also configure the Wireless Edge Services zl Module to forward logs to up
to three external syslog servers. Complete these steps:
1. Select Management > System Logging > Log Options.