WESM zl Management and Configuration Guide WT.01.28 and greater

12-87
Wireless Network Management
MAC Filters (Local MAC Authentication)
Figure 12-62.ACL Import Result Screen Error Messages
Errors include:
■ messages informing you that a field contains an invalid value:
• “ACL index must be an integer”
• “Invalid starting MAC.”
• “Invalid ending MAC.”
• “ACL mode must be either Allow or Deny”
As explained earlier, each line in the file must include four fields with valid
values for index number, MAC addresses, and ACL mode (allow or deny).
The screen in Figure 12-62 displays four such errors—all in line 1. In this case,
the imported file is a file exported from another module. Exported files use the
first line to list the names of columns rather than to specify an ACL. You can
ignore the errors. Click OK, and the ACLs are imported to the module.
If the line indicated should specify an actual ACL, click the Cancel button. Open
the file, find the line with the error, and make the correction. See Table 12-4 on
page 12-84 for help in specifying correct values.
Then re-import the file, as described in “Importing MAC Standard ACLs” on
page 12-84.
■ “ACL index already exists - please choose another”
The ACL in the line indicated conflicts with an ACL already configured on the
Wireless Edge Services zl Module. That is, they have the same index number.