WESM zl Management and Configuration Guide WT.01.28 and greater

12-92
Wireless Network Management
Network Self Healing
Specifying Neighbors Manually
Keep these concepts in mind as you configure neighbors:
■ The neighbor relationship is reciprocal: if you configure a neighbor list on radio 1
that includes radio 3, radio 3’s neighbor list automatically adds radio 1. (See
Figure 12-64.)
■ However, the relationship is not communicative: if radio 1’s neighbor list
includes both radio 3 and radio 4, radio 3’s list will include radio 1, but radio 3’s
list will not include radio 4 unless you explicitly configure radio 4 and radio 1
as neighbors.
■ You configure neighbors on a per-radio basis. That is, instead of configuring a
group of neighbors with certain members, you assign each radio a list of
neighbors.
To assign neighbors to a radio, complete these steps:
1. Select Special Features > Self Healing and click the Neighbor Details tab. In
the upper-right corner of the screen, verify that neighbor recovery is enabled.
Figure 12-65.Configuring Neighbors
All RP radios adopted by this module are listed.