WESM zl Management and Configuration Guide WT.01.28 and greater

12-98
Wireless Network Management
Network Self Healing
1. Select Network Setup > Radio > Configuration.
2. Select the radio and click the Edit button. The Configuration screen for the
selected radio is displayed. (See Figure 12-70.)
Figure 12-70.Configuring the Self Healing Offset Option
3. In the Advanced Properties section, enter a value in the Self Healing Offset field.
Base the offset on the radio’s antenna gain and the rules of your regulatory
domain as explained in http://www.hp.com/rnd/support/manuals/rports.htm.
4. Click the OK button.
Interference Avoidance
Also called dynamic channel selection, interference avoidance helps your RP radios
choose the best channel in your environment at the moment. If the Wireless Edge
Services zl Module detects interference on a radio’s current channel, it has the radio
use Auto-Channel Selection (ACS) to choose a new channel.
The module implements this procedure for interference avoidance:
Self Healing
Offset