WESM zl Management and Configuration Guide WT.01.28 and greater

13-15
sFlow Agent
Configuring sFlow Using the Web Browser Interface
3. Click the Edit button. The Counter Polling Configuration screen is displayed.
For the Data Source, the screen displays the index and name of the radio that
the module’s agent polls. The sFlow Instance shows which of the six instances
you are currently configuring.
Figure 13-7. Counter Polling Configuration
4. Select 4, 5, or 6 from the Receiver Instance drop-down menu.
The Wireless Edge Services zl Module’s sFlow agent sends the counters for this
radio to the sFlow collector associated with the selected instance.
You can map this sFlow instance to any receiver instance, even if that receiver
is already mapped to another instance on this radio.
5. Enter a value between 20 and 65535 in the Interval field. This is the maximum
length, in seconds, between polls on this radio.
A lower value mandates more frequent polling. As always, balance the greater
accuracy offered by frequent polling with the extra overhead.
6. Click the OK button.
7. Click the Save link to copy the configuration to the startup-config.