WESM zl Management and Configuration Guide WT.01.28 and greater

A-16
ProCurve Wireless Services zl Module Command Line Reference
Manager Commands
– peer Peer establishment
– system System events
• nsm Network Service Module (NSM)
– all Enable all debugging
– events NSM events
– kernel NSM kernel
– packet NSM packets
+ detail Detailed information display
+ recv NSM receive packets
- detail Detailed information display
++ send NSM send packets
+++ detail Detailed information display
• pktdrvr Pktdrvr (kernel wireless) debugging messages
– all trace all messages from pktdrvr, including debugging ones (Note:
setting this level will make the switch interfaces very slow. This is only
for testing in an environment with extremely low, controlled traffic)
– err trace error messages from pktdrvr (default if no parameter is
specified)
– info trace error, warning, and informational messages from pktdrvr
– ratelimit log message ratelimiting
– skippacketfilter dont call the packet filtering API when rx/tx frames
– warn trace error and warning messages from pktdrvr
• pm Proces s Monitor
– all All debugging
– errors E rrors
– heartbeats Heartbeats processing
– init Initialization process
– proc Process state machine
– shutdown Shut down process
– subagent Sub agent
– sys System state machine
• radius RADIUS server debugging messages
– all trace all messages from radius server
– err trace error messages from local radius server
– info
trace error, warning and informational messa
ges from
radius
server
– warn trace error and warning messages from radius server
• redundancy Redundancy Protocol debugging messages
– all Debugging all
– ccmsg Msg exchange with CC
– config Config uration processing
– errors E rrors