WESM zl Management and Configuration Guide WT.01.28 and greater

A-30
ProCurve Wireless Services zl Module Command Line Reference
Manager Commands
– Normal response - The normal response occurs in one to ten seconds,
depending on network traffic.
– Destination does not respond - If the host does not respond, a “timeout”
appears in ten seconds.
?? repetition <1-1000> timeout
<1-256>
– Destination unreachable - The gateway for this destination indicates
that the destination is unreachable.
– Network or host unreachable - The gateway found no corresponding
entry in the route table.
Example
pwd
This command displays the current directory.
Syntax
pwd
Default Setting
N/A
Command Mode
Manager
Example
HPswitch#ping 10.1.0.9
PING 10.1.0.9 (10.1.0.9): 100 data bytes
108 bytes from 10.1.0.9: icmp_seq=0 ttl=64 time=2.1 ms
108 bytes from 10.1.0.9: icmp_seq=1 ttl=64 time=1.2 ms
108 bytes from 10.1.0.9: icmp_seq=2 ttl=64 time=0.7 ms
108 bytes from 10.1.0.9: icmp_seq=3 ttl=64 time=1.5 ms
108 bytes from 10.1.0.9: icmp_seq=4 ttl=64 time=1.1 ms
--- 10.1.0.9 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 0.7/1.3/2.1 ms
HPswitch#
HPswitch#pwd
flash:/
HPswitch#