WESM zl Management and Configuration Guide WT.01.28 and greater

A-49
ProCurve Wireless Services zl Module Command Line Reference
Manager Commands
N/A
Command Mode
Manager
Example
telnet
This command opens a telnet connection.
Syntax
telnet WORD
• WORD - IP address or hostname of a remote system.
– PORT - TCP Port number.
Default Setting
N/A
Command Mode
Manager
Example
This example displays an incomplete route telnet message.
terminal
This command sets terminal line parameters.
Syntax
terminal length | width
• length - Set number of lines on a screen.
– <2-1000> - Number of lines on a screen.
• width - Set width of display terminal.
HPswitch#support clear all
HPswitch
HPswitch#telnet 10.1.0.9 23
telnet: Unable to connect to remote host (10.1.0.9): No
route to host
HPswitch#