WESM zl Management and Configuration Guide WT.01.28 and greater

A-53
ProCurve Wireless Services zl Module Command Line Reference
GlobalCommands
end Ends current mode and changes back to Manager mode. A-63
exit Ends current mode. A-63
[no] fallback (Negates) Configures software fallback commands. A-65
help Displays the interactive help system. A-65
[no] hostname (Negates) Sets system’s network name. A-66
[no] interface (Negates) Selects an interface to configure. A-67
[no] ip (Negates) Interface protocol. A-67
licenses Licensing commands. A-71
[no] logging (Negates) Modify message logging facilities. A-72
logout Exits user from the CLI. A-73
mac Enables configuration of MAC access lists. A-74
management Set properties of the management interface. A-74
no Negates a command or set its defaults A-75
ntp Configure NTP. A-75
[no] password-encryption (Negates) Encrypts passwords in configuration. A-77
radius-server Enables radius server mode. A-78
[no]redundancy (Negates) Configures redundancy group parameters. A-82
service Control the use of network services. A-33
sflow Configures or unclaims an sflow sampling receiver. A-84
show Shows running system information. A-85
[no] snmp-server (Negates) Modify SNMP server parameters. A-95
spanning-tree Spanning tree commands. A-95
time Configures software system clock. A-99
[no] timezone (Negates) Configures the timezone. A-100
[no] upd-server (Negates) Configures autoinstall update server
parameters.
A-101
username Enables user name authentication A-102
wireless Configures wireless parameters. A-103
wlan-acl Apply an ACL on a WLAN. A-104
Command Function Page