WESM zl Management and Configuration Guide WT.01.28 and greater

A-60
ProCurve Wireless Services zl Module Command Line Reference
GlobalCommands
+ espaes256 ESP transform using AES cipher (256 bits)
+ espdes ESP transform using DES cipher (56 bits)
+ espmd5hmac ESP transform using HMACMD5 auth
- esp3des ESP transform using 3DES cipher (168 bits)
-espaes ESP transform using AES cipher
-espaes192 ESP transform using AES cipher (192 bits)
- espaes256 ESP transform using AES cipher (256 bits)
-espdes ESP transform using DES cipher (56 bits)
+ espshahmac ESP transform using HMACSHA auth
- esp3des ESP transform using 3DES cipher (168 bits)
- espaes ESP transform using AES cipher
- espaes192 ESP transform using AES cipher (192 bits)
-espaes256 ESP transform using AES cipher (256 bits)
- espdes ESP transform using DES cipher (56 bits)
• isakmp Configure ISAKMP policy
– client Mo deconfig or IPSec/L2TP settings
+ configuration configuration pushed to the client
- group group (currently only one is supported)
++ default default group tag
– keepalive Set a keepalive interval for use with remote peers
+ <103600> Number of seconds between keep alives
– key Set preshared key for remote peer
+ 0 Password is specified UNENCRYPTED
- WORD user password
++ address define shared key with IP address
-- A.B.C.D Peer IP address
++ hostname define shared key with hostname
-- WORD hostname of peer with whom the key is shared
+ 2 Password is encrypted with passwordencryption secret
- WORD user password
++ address define shared key with IP address
-- A.B.C.D Peer IP address
++ hostname define shared key with hostname
-- WORD hostname of peer with whom the key is shared
+ WORD user password
- address define shared key with IP address