WESM zl Management and Configuration Guide WT.01.28 and greater

A-72
ProCurve Wireless Services zl Module Command Line Reference
GlobalCommands
logging
This command modifies message logging facilities. The no command negates the
logging configuration.
Syntax
logging (aggregationtime | buffered | console | faility | host | monitor | on | syslog)
• aggregationtime Set number of seconds for aggregating repeated mes-
sages
– <160> Aggregation time in seconds
• buffered Set buffered logging level
– <07> Logging severity level
– alerts Immediate action needed (severity=1)
– critical Critical conditions (severity=2)
– debugging Debugging messages (severity=7)
– emergencies System is unusable (severity=0)
– errors Error conditions (severity=3)
– informational Informational messages (severity=6)
– notifications Normal but significant conditions (severity=5)
– warnings Warning conditions (severity=4)
• console Set console logging level
– <07> Logging severity level
– alerts Immediate action needed (severity=1)
– critical Critical conditions (severity=2)
– debugging Debugging messages (severity=7)
– emergencies System is unusable (severity=0)
– errors Error conditions (severity=3)
– informational Informational messages (severity=6)
– notifications Normal but significant conditions (severity=5)
– warnings Warning conditions (severity=4)
• facility Syslog facility in which log messages are sent
– local0 Syslog facility local0
– local1 Syslog facility local1
– local2 Syslog facility local2
– local3 Syslog facility local3
– local4 Syslog facility local4
– local5 Syslog facility local5
– local6 Syslog facility local6
– local7 Syslog facility local7
• host Configure remote host to receive log messages
–
A.B.C.D
Remote host's IP address