WESM zl Management and Configuration Guide WT.01.28 and greater

A-83
ProCurve Wireless Services zl Module Command Line Reference
GlobalCommands
Example
Related Commands
show redundancy (page A-147)
service
This command enables user to control the use of network services.
Syntax
service (dhcp | ftp | no | radius)
• dhcp Enable the DHCP Server service
• ftp Co nfigure FTP Server
– enable Enable FTP Server
– password Co nfigure FTP password
+ 0 Password is specified UNENCRYPTED
- LINE Pass word
+ 1 Password is encrypted with SHA1 algorithm
- LINE Pass word
++ LINE Password
– rootdir Configure FTP root dir
+ DIR Root dir of the FTP server
• no Negate a command or set its defaults
– ftp Co nfigure FTP Server
+ enable Disable FTP Server
• radius Enable radius server
– restart Restart the radius server with updated configuration
Default Setting
HPswitch#configure
HPswitch(config)#redundancy interfaceip 10.10.1.20
HPswitch(config)#redundancy memberip 10.10.1.21
HPswitch(config)#redundancy mode active
HPswitch(config)#redundancy holdperiod 20
HPswitch(config)#redundancy groupid 50
HPswitch(config)#redundancy handlestp enable
HPswitch(config)#redundancy discoveryperiod 10
HPswitch(config)#redundancy holdperiod 10
HPswitch(config)#