WESM zl Management and Configuration Guide WT.01.28 and greater

A-105
ProCurve Wireless Services zl Module Command Line Reference
Interface Commands
description (interface)
This command configures a description for the interface. The no command negates
this configuration.
Syntax
description (LINE )
no description
• LINE - Characters describing this interface.
Default Setting
N/A
Command Mode
Interface Configuration
Example
Related Commands
show interfaces (page A-137)
ip (interface)
This command configures ip parameters of the interface. The no command negates
this configuration.
Syntax
ip (address)
no ip address
• address - Configures an internet protocol address of an interface.
show Detailed in Show Command Section A-
128
support Detailed in Support Command Section A-
183
HPswitch#configure
HPswitch(config)#interface vlan1
HPswitch(config-if)#description EXAMDES
HPswitch(config-if)#
Command Function Page