WESM zl Management and Configuration Guide WT.01.28 and greater

A-106
ProCurve Wireless Services zl Module Command Line Reference
Interface Commands
– A.B.C.D/M - IP address (e.g. 10.0.0.1/8).
– dhcp - Use DHCP Client to obtain IP address for this interface.
Default Setting
unassigned (DHCP)
Command Mode
Interface Configuration
Example
Related Commands
show ip interface (page A-138)
management
This command configures the selected interface as the management interface.
Syntax
management
Default Setting
N/A
Command Mode
Interface Configuration
Example
Related Commands
show management (page A-143)
HPswitch#configure
HPswitch(config)#interface vlan1
HPswitch(config-if)#ip 10.0.0.1/4
HPswitch(config-if)#
HPswitch#configure
HPswitch(config)#interface vlan1
HPswitch(config-if)#management
HPswitch(config-if)#