WESM zl Management and Configuration Guide WT.01.28 and greater

A-108
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
adopt-unconf-radio
This command adopts a radio even if its not yet configured. The default templates
are used for configuration. The no command negates this configuration.
Syntax
adopt-unconf-radio (enable)
no adopt-unconf-radio enable
• enable - Enables the adoption of unconfigured radios.
Default Setting
N/A
Command Mode
Wireless Configuration
help Detailed in Manager Command Section A-23
ids Intrusion detection configuration commands. A-111
logout Detailed in Manager Command Section A-23
[no] mac-auth-local (Negates) Establishes local mac authentication list. A-
113
[no] proxy-arp (Negates) Responds to ARP requests from the RON to
WLAN on behalf of stations.
A-
114
[no] radio (Negates) Radio configuration commands. A-
114
[no] self-heal (Negates) Self-healing configuration commands. A-
118
show Detailed in Show Command Section A-
128
support Detailed in Support Command Section A-
183
[no] wlan (Negates) WLAN configuration commands. A-
120
[no] wlan-prioritization (Negates) Use wlan priority weights to determine
packet queueing order.
A-
127
Command Function Page