WESM zl Management and Configuration Guide WT.01.28 and greater

A-115
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
The radio (<1-1000> | RADIO | all-11a | all-llbg | default-11a | default-11bg)
commands share the following parameters:
– adoption-pref-id - A preference identifier for this radio port. The radio
port is more likely to be adopted by a wireless module that
is its preferred wireless module.
+<1-65535> - The ID.
– antenna-mode - Antenna diversity mode.
+diversity - Full Diversity (both antennas).
+primary - Primary Antenna only.
+secondary - Secondary Antenna only.
– beacon-interval - Beacon interval in K-uSec.
+<50-200> - Beacon interval in milliSeconds.
– bss - Map wireless LANs to radio BSSIDs.
+<1-4> - The BSS where wireless LANs will be mapped.
- WLAN - A list (eg: 1,3,7) or range (eg: 3-7) of WLAN indices. When
a BSS is also specified, the first WLAN will be used as the primary
WLAN. When the auto option is used, the system will automati-
cally assign the first four WLANs as primaries on their respective
BSS.
+auto - Automatic assignment of BSS. The user selects wireless LANs,
and the system assigns them to a BSS automatically.
- WLAN - A list (eg: 1,3,7) or range (eg: 3-7) of WLAN indices. When
a BSS is also specified, the first WLAN will be used as the primary
WLAN. When the auto option is used, the system will automati-
cally assign the first four WLANs as primaries on their respective
BSS.
– channel-power - Location, channel and transmit power level.
+indoor - Indoor location.
+outdoor - Outdoor location.
The indoor and outdoor parameters share these parameters:
-<1-200>- Channel number.
++<4-20 - Power in dBm.
-acs - Auto channel selection (radio will scan for the least congested
channel at startup or reconfiguration).
++<4-20> - Power in dBm.
-random - Random channel selection.
++<4-20 - Power in dBm.
– copy-config-from - Copies the configuration from a previously config-
ured radio.