WESM zl Management and Configuration Guide WT.01.28 and greater

A-118
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
Examples
Related Commands
show wireless radio statistics (page A-169)
self-heal
This command configures the self-healing commands. The no command negates the
configuration.
Syntax
self-heal (interference-avoidance| neighbor-recovery)
no self-heal
• interference-avoidance - Interference Avoidance configuration.
– enable - Enables/disables interference avoidance.
– hold-time - The number of seconds to disable interference avoidance
after a detection. This prevents a radio from changing channels contin-
uously.
+<0-65535> - A number of seconds between 0-65535.
HPswitch#configure
HPswitch(config)#wireless
HPswitch(config-wireless)#radio 1 adoption-pref-id 5
HPswitch(config-wireless)#radio 1 antenna-mode diversity
HPswitch(config-wireless)#radio 1 beacon-interval 50
HPswitch(config-wireless)#radio 1 channel-power indoor acs
10
Regulatory parameter values depend on country of operation and radio
type.Refer to documentation for more regulatory information.
HPswitch(config-wireless)#radio 2 copy config-from default-
11a
HPswitch(config-wireless)#radio 1 max-stations 64
HPswitch(config-wireless)#radio 1 wmm background cw 3 5
HPswitch(config-wireless)#radio add 5 A1-B2-C3-D4-E5-F6 11bg
HPswitch(config-wireless)#radio configure-8021X username
manager password simple