WESM zl Management and Configuration Guide WT.01.28 and greater

A-119
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
– retries - The average number retries to cause a radio to re-run auto
channel selection.
+Number - A decimal number between 0.0 and 15.0.
• neighbor-recovery - Neighbor recovery configuration commands.
– action- Radio self healing action when neighbors are detected
down.
+both - Raise the power to max and open all rates.
+none - Do nothing.
+open-rates - Open all rates.
+raise-power - Raise the power to max.
– enable - Mon itor radio-ports and attempt to i ncrease c overage
on failure.
– neighbors - Add radios as neighbors.
+<1-1000> - A single radio index.
-<1-1000> - A single radio index.
– run-neighbor-detect - Disassociate all stations, clear current neigbors
and run neighbor detection.
Default Setting
N/A
Command Mode
Wireless Configuration
Example
Related Commands
show wireless self-heal-config (page A-176)
HPswitch#configure
HPswitch(config)#wireless
HPswitch(config-wireless)#self-heal interference-avoidance
enable
HPswitch(config-wireless)#self-heal neighbor-recovery enable
HPswitch(config-wireless)#self-heal neighbor-recovery
neighbors 5 5
HPswitch(config-wireless)#self-heal neighbor-recovery run-
neighbor-detect
HPswitch(config-wireless)#