WESM zl Management and Configuration Guide WT.01.28 and greater

A-122
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
+wmm - 802.11e / Wireless MultiMedia parameters.
-8021p - Use 802.1p frame priority (field in the VLAN tag) to
determine packet priority.
-background - Background traffic [DSCP: 0x08, 0x10] [802.1d: 1, 2]
-best effort - Best effort traffic [DSCP: 0x00, 0x18] [802.1d: 0, 3]
-dscp - Use DSCP (Differentiated Services Code Point) bits in the IP
header to determine packet priority.
-enable - Enables 802.11e (Wireless MultiMedia) support on this
WLAN.
-video - Video Traffic [DSCP: 0x20, 0x28] [802.1d: 4, 5]
-voice - Voice Traffic [DSCP: 0x30, 0x38] [802.1d: 6, 7]
The background, best effort, voice, and video share these parameters:
++aifsn - Arbitration Inter Frame Spacing Number: the wait time
in milliSeconds between data frames is derived using AIFSN
and the slot-time.
- -<1-15> - The Arbitration Inter Frame Spacing Number.
++burst - Transmit-opportunity: an interval of time when a partic-
ular WMM STA has the right to initiate transmissions onto the
wireless medium.
- -<0-65535> - The transmit-opportunity in 32 microSecond
units.
++cw - Contention Window parameters: wireless stations pick a
number between 0 and the minimum contention window to wait
before retrying transmission. Stations then double their wait
time on a collision, until it reaches the maximum contention
window.
- -<0-15> - cwMin: The minimum contention window. The
actual value used is (2^cwMin - 1).
+++<0-15> - cwMax: The maximum contention window. The
actual value used is (2^cwMax - 1).
++txop-limit - Transmit-opportunity: an interval of time when a
particular WMM STA has the right to initiate transmissions onto
the wireless medium.
- -<0-65535> - The transmit-opportunity in 32 microSecond
units.
– radius - Modify Radius/802.1X related parameters.
+reauth - Enables periodic reauthentication of all associated stations.
-<30-65535> - Reauthentication period in seconds.
+server - Modifies Radius/802.1X server parameters.