WESM zl Management and Configuration Guide WT.01.28 and greater

A-123
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
-primary - Primary radius server.
-secondary- Primary radius server.
The primary and secondary commands share these parameters:
++A.B.C.D - Radius server IP address.
- -auth-port - Radius server authentication port (default:1812).
+++<1024-65535> - Radius server authentication port
(default:1812).
++radius-key- Radius server shared secret, up to 127 characters.
- - 0 - Password is specified UNENCRYPTED.
+++LINE - Radius server shared secret, up to 127 characters.
- - 2 - Password is encrypted with password-encryption secret.
+++LINE - Radius server shared secret, up to 127 characters.
- - - LINE- Radius server shared secret, up to 127 characters.
+timeout - Time the wireless module waits for a response from the
radius server before retrying.
- <1-60> - Timeout in seconds.
++retransmit- Number of retries before the wireless module will
give up and disassociate the station.
- - <1-10> - Retry count.
– station - Modifies Radius/802.1X supplicant related parameters.
+timeout - Time the wireless module waits for a response from the
radius server before retrying.
- <1-60> - Timeout in seconds.
++retransmit- Number of retries before the wireless module will
give up and disassociate the station.
- - <1-10> - Retry count.
– SSID - The SSID of this WLAN.
+WORD - A string of up to 32 characters.
– vlan - The VLAN assignment of this WLAN.
+<1-4094> - A VLAN identifier <1-4094>.
– web-auth - Modify web-auth related parameters.
+allow-list - Modify web-auth white list parameters. Users who have
not yet authenticated will be allowed access to these IP addresses.
-<1-10> - Allow-list Rule index (1-10).
++A.B.C.D - Allow-list IP address.
+radius - Modify web-auth radius server parameters. The parameter
extensions are the same as previous listed under
“radius - Modify Radius/
802.1X related parameters.” on page A-122.