WESM zl Management and Configuration Guide WT.01.28 and greater

A-124
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
+webpage - Modify web-auth page parameters.
-external - Modify web-auth External page.
-internal - Modify web-auth Internal page.
The external and internal commands share these parameters:
++failure - Users are redirected to this webpage if they fail authen-
tication.
++login - Users are prompted for their username and password on
this webpage.
++welcome - Users are redirected to this webpage after they
authenticate successfully.
The failure/login/welcome parameters share these parameters:
- -description - Text that is displayed as the main body (normal
font, middle of page) of the webpage.
- -footer - Text that is displayed at the footer (smaller font,
bottom section ) of the webpage.
- -header - Text that is displayed as a header (large font, top
section) of the webpage.
- -main-logo - Main image (large size) that will be served up
by the local webpage. Appears between the header and descrip-
tion on the webpage.
- -small-logo - Small image (thumbnail size) that will be served
up by the local webpage. Appears near the footer on the
webpage.
- -Title - Text that will be the title of the webpage.
+webpage-location - The location of the web pages to be used for
authentication. These pages can either be hosted on the wireless module
or on an external web server.
-external - Use login/welcome/failure Web pages on an external
server.
-internal - Use login/welcome/failure Web pages configured on the
wireless module.
– wep128 - Configure WEP128 parameters.
– wep64- Configure WEP64 parameters.
The wep128 and wep64 commands share these parameters:
+key - Configures pre-shared hex keys.
-<1-4> - Key index being configured.
++ascii - Keys as ascii characters (5 characters for wep64, 13 for
wep128).