WESM zl Management and Configuration Guide WT.01.28 and greater

A-125
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
++hex - Keys as ascii characters (5 characters for wep64, 13 for
wep128).
The hex and ascii commands share these parameters:
- -0 - Password is specified UNENCRYPTED.
+++WORD - Key (10 hex or 5 ascii characters for wep64, 26
hex or 13 ascii characters for wep128).
- -2 - Password is encrypted with password-encryption secret.
+++WORD - Key (10 hex or 5 ascii characters for wep64, 26
hex or 13 ascii characters for wep128).
- -WORD - Key (10 hex or 5 ascii characters for wep64, 26 hex
or 13 ascii characters for wep128).
+phrase - Specify a passphrase from which the keys are to be derived.
-LINE - The passphrase between 4 and 32 characters long.
+web-default-key - Configures the transmit key index.
-<1-4>- The key index to be used for transmission from AP to MU.
Default Setting
Disabled
Command Mode
Wireless Configuration
Examples
HPswitch#configure
HPswitch(config)#wireless
HPswitch(config-wireless)#wlan 1 enable
HPswitch(config-wireless)#wlan 1 ssid SAM
HPswitch(config-wireless)#wlan 1 encryption-type wep128
HPswitch(config-wireless)#wlan 1 authentication-type eap
HPswitch(config-wireless)#wlan 1 closed-system
HPswitch(config-wireless)#wlan 1 qos svp enable
HPswitch(config-wireless)#wlan 1 inter-station-blocking
HPswitch(config-wireless)#wlan 1 wep128 wep-default-key 4
HPswitch(config-wireless)