WESM zl Management and Configuration Guide WT.01.28 and greater

A-131
ProCurve Wireless Services zl Module Command Line Reference
Show Commands (All Contexts)
Example
show alarm-log
This command displays all alarms since the last boot.
Syntax
show alarm-log (<1-65535> | acknowledged | all | count | new | severitytolimit)
– <165535> Display details for specific alarm id
– acknowledged Display acknowledged alarms currently in the system
– all Display all alarms currently in the system
– count Display count of alarms currently in the system
– new Display new alarms currently in the system
– severitytolimit Display all alarms having specified or higher severity
+ critical Display all critical alarms
+ informational Display all informational or higher severity alarms
+ major Display all major or higher severity alarms
+ normal Display all normal or higher severity alarms
+ warning Display all warning or higher severity alarms
Default Setting
N/A
Command Mode
All
Example
show commands
This command displays command lists.
Syntax
HPswitch#show aclstats
HPswitch#
HPswitch#show alarm-log
No Alarms in the alarm log
HPswitch#