WESM zl Management and Configuration Guide WT.01.28 and greater

A-138
ProCurve Wireless Services zl Module Command Line Reference
Show Commands (All Contexts)
Default Setting
N/A
Command Mode
Manager
Example
show ip
This command displays ip status and configuration.
Syntax
show ip (accessgroup | accesslist | arp | dns | dhcp | dhcpvendoroptions | dns | domain
| interface | nat | route | routing | securewebmanagement | telnet | webmanagement)
– accessgroup Display ACLs attached to an interface
+ IFNAME Interface name
+ dnlink Ethernet Interface Id
+ uplink Ethernet Interface
+ vlan Vla n Interface
- <14094> Vl an Id
– accesslist List IP access lists
– arp Address Resolution Protocol (ARP)
– ddns D DNS Configuration
+ binding DNS Address bindings
– dhcp DHCP Server Configuration
+ binding DHCP Address bindings
+ pool DHCP Pools
- WORD DHCP pool name
HPswitch#show interfaces dnlink
Interface dnlink
Hardware Type Ethernet, Interface Mode Layer 2, address is 00-01-e6-f5-86-fc
index=2, metric=1, mtu=1500, (PAL-IF) <UP,BROADCAST,RUNNING,MULTICAST>
Speed: Admin Auto, Operational 1G, Maximum 1G
Duplex: Admin Auto, Operational Full
input packets 1372779, bytes 457008862, dropped 0, multicast packets 0
input errors 0, length 0, overrun 0, CRC 0, frame 0, fifo 0, missed 0
output packets 1372758, bytes 117174000, dropped 0
output errors 0, aborted 0, carrier 0, fifo 0, heartbeat 0, window 0
collisions 0
HPswitch#