WESM zl Management and Configuration Guide WT.01.28 and greater

A-144
ProCurve Wireless Services zl Module Command Line Reference
Show Commands (All Contexts)
Default Setting
N/A
Command Mode
Manager
Example
show ntp
This command displays network time protocol.
Syntax
show ntp (associations | status)
– associations NTP associations
+ detail Sho w detail
– status NTP Status
Default Setting
N/A
Command Mode
Manager
Example
HPswitch#show management
Mgmt Interface: vlan1
HPswitch#
HPswitch#show ntp status
Mgmt Interface: vlan1
Clock is synchronized, stratum 0, actual frequency is 0.0000
Hz, precision is 20
reference time is 00000000.00000000 (Feb 07 06:28:16 UTC
2036)
clock offset is 0.000 msec, root delay is 0.000 msec
root dispersion is 0.000 msec,
HPswitch#show ntp associations
address ref clock st when poll reach delay
offset disp
* master (synced), # master (unsynced), + selected, -
candidate, ~ configured