WESM zl Management and Configuration Guide WT.01.28 and greater

A-168
ProCurve Wireless Services zl Module Command Line Reference
Show Commands (Wireless)
show wireless phrase-to-key
This command displays the WEP keys generated by a passphrase.
Syntax
show wireless phrase-to-key (wep128 | wep64)
• wep128 - Displays WEP128 keys.
– WORD - Passphrase between 4 and 32 characters.
• wep64 - Displays WEP64 keys.
– WORD - Passphrase between 4 and 32 characters.
Default Setting
N/A
Command Mode
Manager Configuration Context
Global Configuration Context
Interface Configuration Context
Wireless Configuration Context
Example
show wireless qos-mapping
This command displays the Quality of Service mappings used for mapping WMM
access categories and 802.1p / DSCP tags .
Syntax
show wireless qos-mapping (wired-to-wireless | wireless-to-wired)
+ wired-to-wireless Mappings used when traffic is switched from
wired to the wireless side.
+ wireless-to-wired Mappings used when traffic is switched from
wireless to the wired side.
HPswitch(config-wireless)#show wireless phrase-to-key wep128 help
1) d7aad741102ccc216ed1b59322
2) 2cdd3865719e93719d5a2a87c6
3) 984590afb106774126f8c0b583
4) 792ebf65147269f968cc23c204
HPswitch(config-wireless)#