WESM zl Management and Configuration Guide WT.01.XX and greater

A-156
ProCurve Wireless Services zl Module Command Line Reference
Show Commands (All Contexts)
show snmp-server
This command displays SNMP server information.
Syntax
snmp-server (traps)
– traps Displays trap-enable flags.
+ wireless-statistics Display wireless-stats rate traps
- radio Display radio rate traps
- station Display station rate traps
- wireless-module Display wireless-module rate traps
- wlan Display wlan rate traps
Default Setting
N/A
Command Mode
Manager
Example
show sntp
This command displays simple NTP configuration.
Syntax
show sntp
HPswitch#show snmp-server
Location:
Contact:
SysName: Wireless Services
SNMP v2: enabled
public ro,private rw
SNMP v3: enabled
SNMP host:
trap receiver:10.30.0.242:162 version v3
trap receiver:10.30.0.43:162 version v3
HPswitch#