WESM zl Management and Configuration Guide WT.01.XX and greater

Index – 1
Index
Numerics
5400zl Series
See wireless services-enabled switch
802.11
frame types … 1-56
management frames … 1-56
overview … 1-54
802.11 replay attack … 12-58
802.11a
defined … 1-54
radio adoption defaults for … 3-9
802.11b
defined … 1-55
radio adoption defaults for … 3-9
802.11g
802.11g only … 3-16
defined … 1-55
radio adoption defaults for … 3-9
802.11h … 1-55
802.1X … 1-25
client on radio port … 1-68, 1-74, 2-78
configuring on a WLAN … 4-34
dynamic VLANs with … 4-87
pre-authentication for … 9-3
RADIUS server settings … 4-42
station settings … 4-35
8200zl Series
See wireless services-enabled switch
A
access category
setting for WLAN manually … 4-111
WMM and … 4-92
accounting
overview … 4-68
RADIUS … 11-37
See also RADIUS accounting
syslog, for WLAN … 4-69
ACL
applying to interface … 7-26
applying to physical port … 7-26
configuration steps … 7-10
creating and choosing type … 7-10
dynamic or user-based … 1-36, 4-88
extended IP
defined … 7-3
destination IP filter … 7-22
ICMP filter … 7-19
protocol filter … 7-19
source address filter … 7-22
TCP/UDP port filter … 7-21
filters
overview … 7-5
MAC extended
defined … 7-4
encapsulated protocol filter … 7-25
priority filter … 7-25
VLAN ID filter … 7-25
MAC standard (filter)
allow list … 12-76
applying to a WLAN … 12-78
configuring … 12-76
defined … 7-4
deny list … 12-76
NAT
standard ACL for … 8-22
operation
physical port required … 7-26
types … 7-7
overview … 7-2
precedence
defined … 7-5
setting in extended IP … 7-18
setting in MAC extended … 7-24
setting in standard IP … 7-15
viewing in detailed statistics … 7-31
routing required for … 7-26
rules
creating … 7-13
creating for extended IP … 7-17
creating for MAC extended … 7-23
creating for standard IP … 7-14
overview … 7-4
standard IP
defined … 7-3
source address filter … 7-16
stateful … 7-2
strategies for creating … 7-8
types … 1-40, 7-3