WESM zl Management and Configuration Guide WT.01.XX and greater

2-31
Configuring the ProCurve Wireless Edge Services zl Module
Management Interfaces
Figure 2-13. Disable SNMP V3 Warning
If you are sure that you want to disable SNMP v3 and Web access, click
the Yes button. You have one more chance to change your mind: you must
click the Apply button in the Management > Web Access Control screen to
actually disable the server.
4. Configure other SNMP options:
a. In the Retries field, enter the number of times that the Wireless Edge
Services zl Module should re-attempt to send an SNMP message that
times out.
The default value is 3.
b. In the Timeout field, specify, in seconds, how long the module should
wait before timing out an SNMP message.
The default value is 10 seconds.
5. Click the Apply button.
Choosing SNMP versions is only one step to configuring SNMP:
■ See “Configuring Web-Users” on page 2-40 to learn how to create SNMP
v3 users.
■ See “SNMP Traps and Error Reporting” on page 2-109 to learn how to set
up SNMP traps and configure SNMP communities.