WESM zl Management and Configuration Guide WT.01.XX and greater

2-40
Configuring the ProCurve Wireless Edge Services zl Module
Management Interfaces
Figure 2-20. Editing a Web-User
4. In the Password and Confirm Password fields, enter a new password
between 8 and 32 characters. The password can include spaces and
special characters.
5. Click the OK button.
6. Click the Save link to copy these changes to the Wireless Edge Services
zl Module’s startup-config.
Configuring Web-Users
By default, the Wireless Edge Services zl Module has two SNMP v3 user
accounts: manager and operator. You can add more users allowed to access
the Wireless Edge Services zl Module’s Web browser interface.
Note Rights to the module CLI are determined by rights to the wireless services-
enabled switch CLI. You must access the module CLI through the switch CLI,
and you are granted the same rights that you had in the switch CLI.
The Wireless Edge Services module can authenticate these users against a
local list of users, or you can have a RADIUS server authenticate the users.