WESM zl Management and Configuration Guide WT.01.XX and greater

2-46
Configuring the ProCurve Wireless Edge Services zl Module
Management Interfaces
Note If you do not correctly configure the RADIUS server, you can lock yourself
out of the Wireless Edge Services zl Module Web browser interface.
To fix the problem, access the module CLI through the wireless services-
enabled switch. Enter this global configuration mode command to have the
module authenticate Web-Users against its local list:
Syntax: aaa authentication login default local
Then configure at least one user in the local list:
Syntax: username <username> password <password>
The password must be between 8 and 32 characters.
Then assign the user rights sufficient to correct the problem. For example:
Syntax: username <username> privilege superuser
Follow these steps to choose how users authenticate when they attempt to
access the Wireless Edge Services zl Module’s Web browser interface:
1. Select Management > Web-Users.
2. Click the Authentication tab.