WESM zl Management and Configuration Guide WT.01.XX and greater

2-48
Configuring the ProCurve Wireless Edge Services zl Module
Management Interfaces
5. Optionally, check the If authentication services are unavailable, allow read-
only access box.
All users are granted read-only (monitor) access when the selected
authentication services are unavailable.
If you do not check the box and authentication services become unavailable,
users will have not access to the Web browser interface at all. (They must
access the module CLI from the wireless services-enabled switch CLI.)
6. Click the Apply button.
7. If you have selected RADIUS for either authentication method, you must
specify the RADIUS server:
a. Click the Add button. The Add RADIUS Server screen is displayed.
Note The Wireless Edge Services zl Module attempts to contact RADIUS servers in
the order that you add them. Be careful to specify your preferred server first.
Figure 2-24. Specifying the RADIUS Server To Authenticate Web-Users
b. Specify the server’s IP address in the Radius Server IP Address field.