WESM zl Management and Configuration Guide WT.01.XX and greater

2-75
Configuring the ProCurve Wireless Edge Services zl Module
Radio Port Adoption
8. If you selected an unadopted RP before clicking the Add button, the RP
MAC Address field displays the MAC address of that RP. Otherwise, enter
the RP’s Ethernet MAC address.
9. In the Radio Settings section, check the boxes for the radio types that you
want—802.11a or 802.11bg (or both).
10. For each radio type that you select, in the corresponding Radio Index field,
enter a number to identify this RP.
Do not enter a radio index number already used on this Wireless Edge
Services zl Module.
11. Click the OK button.
You can also manually add a radio from the Network Setup > Radio screen.
Follow these steps:
1. Select Network Setup > Radio > Configuration.
Note that the screen informs you that automatic adoption is disabled. You
must manually add radios.
Figure 2-42. Network Setup > Radio Screen (Manual Adoption)
Manually
adopt a radio