WESM zl Management and Configuration Guide WT.01.XX and greater

2-82
Configuring the ProCurve Wireless Edge Services zl Module
System Maintenance
Viewing the Software Images
To view the version of the primary and secondary images, access the Manage-
ment > System Maint.—Software screen. (See Figure 2-47.)
Figure 2-47. Management > System Maint.—Software Screen
The Management > System Maint.—Software screen includes the following
fields:
■ Image—This field indicates whether the image is the primary or secondary
image.
■ Version—This field displays the version number of the image file.
■ Current Boot—This field indicates whether or not the image was used the
last time that the Wireless Edge Services zl Module was rebooted. A green
check mark indicates that the image was used; a red x indicates that the
image was not used.
■ Next Boot—This field determines whether the software image will be used
to boot the Wireless Edge Services zl Module the next time the module is
reloaded. A green check mark indicates that the image will be used; a red
x indicates that the image will not be used.