WESM zl Management and Configuration Guide WT.01.XX and greater

2-115
Configuring the ProCurve Wireless Edge Services zl Module
SNMP Traps and Error Reporting
Figure 2-71. Enabling SNMP Traps on the Management > SNMP Trap Configuration
Screen
7. Click the Apply button to save the change to the running-config.
8. Click the Save link at the top of the Web browser interface to save the
changes to the startup-config.
Disabling SNMP Traps
To disable an SNMP trap that you previously enabled, complete these steps:
1. Select Management > SNMP Trap Configuration and click the Configuration
tab.
2. To disable a specific SNMP trap, expand the SNMP category. Select the
SNMP trap that you want to disable, and then click the Disable button, or
double-click the SNMP trap.
3. To disable all the SNMP traps in a category, select the category and click
the Disable all sub-items button.