WESM zl Management and Configuration Guide WT.01.XX and greater

2-164
Configuring the ProCurve Wireless Edge Services zl Module
Enabling Secure Network Time Protocol (NTP)
Figure 2-100.Special Features > Secure NTP > Secure NTP Status Screen
The following information is listed on the screen:
■ Leap—the time source’s leap state, that is, whether it inserts leap seconds.
■ Stratum—how many hops time source is from a clock.
■ Reference—the address of the time source to which the Wireless Edge
Services zl Module is synchronized.
■ Frequency—a Secure NTP server clock’s skew (difference) for the Wire-
less Edge Services zl Module.
■ Precision—the precision (accuracy) of the Wireless Edge Services zl
Module’s time clock, in Hz. The values that normally are displayed in this
field range from -6 for mains-frequency clocks to -20 for microsecond
clocks found in some workstations.
■ Reference time—the timestamp at which the local clock was last set or
corrected.