WESM zl Management and Configuration Guide WT.01.XX and greater

2-168
Configuring the ProCurve Wireless Edge Services zl Module
Digital Certificates
You must complete these tasks to configure a self-signed certificate:
1. Optionally, pre-create a specific key for the certificate. Typically, however,
you can allow the module to automatically generate a key when you create
the certificate.
2. Use the Certificates Wizard to create the certificate.
You must complete these tasks to install a server certificate signed by a CA:
1. Optionally, pre-create a specific key for the certificate. Typically, however,
the module can automatically generate a key when you create the certif-
icate request.
2. Use the Certificates Wizard to create the certificate request.
3. Submit the certificate request to your CA.
4. The CA will send generate the server certificate and send it to you. It
should also send the CA certificate and a CRL. Load these files on an FTP
server, TFTP server, or the station that runs the Web browser interface.
5. Use the Certificates Wizard to upload the server certificate and CA certif-
icate.
6. Use the CLI to upload the CRL.
You access the Certificates Wizard, as well as manage trustpoints, in the
Management > Certificate Management screen.